May 17 Meeting

Jen Finley will be demonstrating using PMC oil paste on porcelain and Art Clay overlay past on glass to add dimensional silver to porcelain or glass.

Meeting begins at 7 pm at Harder Driving School.
If you have done anything for the Kansas City Fountains Challenge, bring it to this meeting!
To work along at the meeting here is the list of tools to bring:

PMC3/Art Clay paste

• paper type and/or syringe type metal clay (optional for decoration)
• CZs or fireable stones (optional for decoration)
• paint brush
• water container
• sanding supplies
• work surface
• pipe cleaners/chenille stems

Supplies for glass or porcelain:

• Art Clay Overlay Paste
• glass cab, china shards, etc.
• paint brush
• water container
• work surface
• pointy tool to scratch off metal clay for sgraffito, like a sewing needle

Jen will have some bisque bead blanks and dichroic glass cabs available for purchase.

April - Guest Speaker Jean Noren

Thanks to Jean Noren of Blue Springs who spent her evening with us. She shared her various methods of incorporating PMC Silver onto her porcelain pottery - from silver embellished porcelain figures (such as dragonflies) added after firing, to pieces with PMC paste or clay painted or embedded onto pieces that have been through two firings (bisque and glazed stages).

She brought samples - which we forgot to photograph! But included pit-fired and horse hair fired pieces. Her colors were muted and lovely, her pots graceful and sturdy. Wish we could show you.

Thanks again, Jean.

Plasma Cutter Fun!

Thanks to Robin MacIntosh and LeAnne Doljac for their riveting demonstrations of plasma cutting and connecting metals.

Robin brought the plasma cutter - her's is a small one, but was still the size of a shop compressor - plus a small shop table, heavy duty clamps, leather aprons and gauntlets, protective eye-wear and a bag of tins to cut. Everyone got a chance to try out cutting thin tin (the type used to package cookies or popcorn ).

The cutting produces sparks but was really pretty easy to cut various rough shapes. Fine control of the cutter obviously takes practice! as seen by these rough shapes.

LeAnne uses a much larger plasma cutter and cuts heavier metal salvaged from old cars! From this, she creates pieces with amazing detail, requiring a practiced hand to control cutting small details.
She brought some dog portraits - made from layering cut metal with pop rivets.

Her dog portraits looked so amazingly real it was hard to believe they were once car hoods.


 You can view more of LeAnne's work here. She demonstrated using riveting tools and pop-rivets as well as eyelets and other types of cold connections.

Robin uses smaller pieces of cut tin for making jewelry and wall art. This angel's wings were cut with the plasma cutter...

What fun we had! Thanks again to LeAnne and Robin.

Don't Forget the Meeting Tuesday March 15th

If you want to use the plasma cutter wear natural fibers as much as possible, the sparks from the torch will leave holes in manmade fibers. Shoes and socks to protect your feet. LeAnne will also be rehashing gorilla cold connecting inside. Let's hope it is dry and warm Tueday!

March 2011 - Plasma Cutters!

Get ready for some fun - at the March meeting Robin and LeAnne are bringing the plasma cutter! What's that??? Actually, so far I've not seen one, but plasma is a physics term referring to a physical state of mater. (solid, liquid, gas or plasma). Somehow, in a plasma cutter an inert gas is turned into plasma, and can be used to quickly and cleanly cut metal. and we're going to do it.

We'll also have some riveting tools available to try - from a demo done a couple years ago by Robin - you can cut pieces and rivet them together.

Bring something to cut (old cookie or cracker tins, metal kitchenware, etc.) and shape ideas (ovals, teardrops, circles, flowers, etc). The plasma cutter must be used outside, so we will have a cutting station outside and a riveting station inside. 

Be sure to wear cotton - long  pants, close-toed shoes, and no flying scarves etc. Safety first!

KCPMC Guild Dues

At the January meeting if the KC PMC Chapter of the PMC Guild, we decided to make a change in our chapter dues. Previously, we asked members for $10/year - the very BEST deal in town!! However keeping track of who paid/when they paid and reminding a different bunch each month of their renewal date was cumbersome.

So, we have altered our dues thusly:
Annual dues are $24 (basically $2/month)  (Still a great deal and comparable with other art guilds.)
Everyone's dues are renewable and payable in January.
New members joining mid-year will pay a pro-rated amount, renewing at full rate the next January


Here's why:

Keeping track of who paid and when will be easier. We want to be able to provide materials for our hands-on meetings and PMC is expensive! So we'll have more of a budget to use during the year for things like:

• Small courtesy honorarium to engage non-member outside speakers*
• Supplies for meetings
• Budget to purchase PMC and supplies -we have PMC3 on hand for purchase at market price.
• Reimbursements for supplies needed for our hands-on meeting topics
• Chapter expenses (we don't have many)  

*NOTE: We do not "pay" guild members for presenting or demonstrating at meetings. This is voluntary.

We are looking into dues payment online with a Paypal account. Online payment will likely have a $1 processing fee attached.

February 2011 KC PMC Guild Meeting

Our schedule says "Making PMC End Caps" to be led by Deb Weld. But her travel plans have changed (blame the weather for this, too.....she's staying in Palm Dessert until KC warms up!!) So...we will rearrange and adjust!

Elements of Design - Form, Color, Composition in Art
Color. Balance. Contrast. Texture. Shape. How do you think about these all these things and stay creative?

How to start a new design..... Do you start with a sketch? or plan your design? or just wing it?
How do you think about form - do you start with a shape? with a stone or cab? with the purpose of the piece - is it a toggle or hinge?  Carol Harder (with a MFA in metalsmithing and over 30 years of high school art class teaching experience) will get us started using good design techniques.

Come to the February meeting and get some basic design help, learn to use design elements to boost your creativity, not to overwhelm it.

Do you keep a design journal or sketchbook to write down and remember your ideas? Please bring it to the meeting!! Is it decorated with PMC or beads or a hand-made clasp? something to think about!

Things to bring:
Pencil, Pen, Colored markers, etc
Paper or sketchbook (moleskin, sketchpad, or blank book - whatever you like)
Your current idea/sketch book